California Department of Water Resources (DWR) | June 13th, 2013
Summary
This report describes the input and output files for the California Central Valley Groundwater-Surface Water Simulation Model (C2VSim). C2VSim is an integrated numeri
This report describes the input and output files for the California Central Valley Groundwater-Surface Water Simulation Model (C2VSim). C2VSim is an integrated numerical model simulating land surface processes and groundwater and surface water flows in the main alluvial aquifer system of California’s Central Valley (figure 1).
C2VSim was developed using the Integrated Water Flow Model (IWFM) application, which couples a three-dimensional finite element groundwater simulation process with one-dimensional land surface, stream flow, lake, unsaturated zone and smallstream watershed simulation processes. The C2VSim version described in this report runs under IWFM version 3.02 and utilizes a coarse grid, and is thus referred to as version 3.02-CG.
In addition, the input files for the C2VSim model are regularly updated to correct errors, incorporate improved input data or extend the simulation time period. These updates are referred to as revisions; this report describes the data in revision R374, released in June 2013.
The C2VSim model inputs include monthly historical precipitation, stream inflows, surface water diversions, land use and crop acreages for the simulation period, October 1921 through September 2009. C2VSim dynamically calculates crop water demands, allocates contributions from precipitation, soil moisture and surface water diversions, and calculates the groundwater pumpage required to meet the remaining demand. The coarse grid version of the C2VSim model incorporates a finite element grid with 1392 elements, grouped into 21 water budget subregions (figure 1), which are further grouped by drainage basin into five hydrologic regions. The model subregions are based on Depletion Study Areas (DSAs), originally created by the DWR Division of Planning for estimating regional water supplies and demands. Hydrologic parameters (including hydraulic conductivities, storage parameters and recession coefficients) were calibrated to match observed values including groundwater heads, groundwater head differences between well pairs, surface water flows, and stream-groundwater flows for the period between September 1975 and October 2003.
The model simulates the historical response of the Central Valley’s groundwater flow system to historical stresses, and can also be used to simulate the response to projected future stresses. Agricultural groundwater pumping is not monitored in the Central Valley, and the C2VSim model provides pumpage estimates that are considered robust because they are constrained spatially and temporally by the estimated demand and surface water supplies. The calibrated model is also being used as the basis for the groundwater flow component of CalSim 3, a water resources planning model for simulating operation of the California State Water Project (SWP) and Federal Central Valley Project (CVP).