Sediment Lithology and Borehole Erosion Testing, American and Sacramento Rivers, California

A field investigation intended to measure the potential for erosion of sediments beside the American and Sacramento Rivers near Sacramento, California, is described. The study featured two primary components: (1) drilling and soil sampling to reveal lithology, down to depths matching the local river thalweg, where possible, and (2) borehole erosion tests (BETs) as described by Briaud and others (2017) at many of the same locations. The latter test involved drilling a vertical hole, measuring its diameter profile, inserting a hollow drilling rod to almost the bottom of the hole, and pumping fluid through the drilling rod at a known discharge for a chosen time interval. The hole was then resurveyed to establish an erosion rate (change in borehole radius divided by duration of flow event) as a function of depth, and the test was repeated. This test was performed with water as the erosive fluid at 12 locations, with 1 test repeated with drilling mud. Lithology holes were drilled at these same locations and an additional five locations. Drilling operations took place on river left and river right on the American River and river left (left bank, when looking downstream) on the Sacramento River.